ÇAPAR KÖPÜK BALONCUK
Çapar köpük (baloncuk).
1 kutu 36 adet.
1 koli: 8 kutu.
Toplam koli 288 adet.
Page 1 of 13
Aşkın GÜNERİ Neslihan Sözer
Customer Care Team Leader Country Business Line Manager Softlines&Hardlines
Zeynep Akın/ Chemical Laboratory Manager
Intertek Test Hizmetleri A.S.
Merkez Mahallesi Sanayi Cad. No: 23 Altındağ Plaza Yenibosna 34197 – ISTANBUL / TURKEY
Phone : +90.212. 496 46 46 Fax : +90.212. 452 80 55
e-mail : firstname.lastname@example.org
REPORT NUMBER : TURT180206840_REVISED02
APPLICANT NAME Çapar Ticaret – Hasan Çapar
ADDRESS Çapar Ticaret – Hasan Çapar İstoç 30. Ada No:16, , Bağcılar, İstanbul, TURKEY,
Tel: 0 212 513 08 42 – 0 212 659 44 01
Attention : Hasan Çapar (email@example.com / firstname.lastname@example.org)
BUYER’S NAME: TOYS-04
SAMPLE DESCRIPTION: One sample of bubble toy with blue bottle
DATE IN: 13 November, 2018 (11:34)
DATE OUT: 19 November, 2018 / 04 December, 2018 / 05 December, 2018
COUNTRY OF ORIGIN: TURKEY
NOTE: In this revised 01 report, sample picture was changed and adress was updated by the request of
This report replaced the report no TURT180206840 dated on 19 November, 2018 and must be
used instead of it.
Report no TURT180206840 dated on 19 November, 2018 is invalid.
In this revised 02 report, fax number was taken by the request of the applicant.
This report replaced the report no TURT180206840_REVISED01 dated on 04 December, 2018
and must be used instead of it.
Report no TURT180206840_REVISED01 dated on 04 December, 2018 is invalid.
SAFETY OF TOYS – PART 1: MECHANICAL AND PHYSICAL PROPERTIES P (Except 7.2)
SAFETY OF TOYS – PART 2: FLAMMABILITY P
SAFETY OF TOYS – PART 3: MIGRATION OF CERTAIN ELEMENTS P
PHTHALATE CONTENT P
POLYCYCLIC AROMATIC HYDROCARBONS (PAHs) ANALYSIS P
DETERMINATION OF CADMIUM CONTENT P
BENZENE CONTENT P
P = MEETS BUYER’ S REQUIREMENT / F = DOES NOT MEET BUYER’ S REQUIREMENT / NR = NO REQUIREMENT / SC=STILL CONTINUES / X=NOT
PERFORMED / NA = NOT APPLICABLE/ LS : LACK OF SAMPLE
This report (including any enclosures and attachments) are prepared for the exclusive use of the Customer(s) named in the report and solely for the purpose for which
it is provided and on the basis of instructions and information and/or materials supplied by Intertek’s Customer. The test results relate only to the specific items tested
and are not intended to be a recommendation for any particular course of action. Customer is responsible for acting as it sees fit on the basis of such results. Unless
Intertek provide express prior written consent, no part of this report should be reproduced, distributed or communicated to any third party. Intertek do not accept any
liability if this report is used for an alternative purpose from which it is intended, nor do Intertek owe any duty of care to any third party in respect of this report. Except
where explicitly agreed in writing, all work and services performed is governed by Intertek Standard Terms and Conditions of Service which is available on request or
can be obtained at http://www.intertek.com/terms. The reported uncertainty is based on a standard uncertainty multiplied by a coverage factor k=2, providing a level
of confidence of approximately 95%. The uncertainty evaluation has been carried out in accordance with ISO/IEC 17025 and TÜRKAK accreditation requirements.
Unless otherwise is specified, all Pass or Fail results are given without uncertainty considered. When uncertainty is taken into account, the result may be borderline.
Borderline results need to be re-tested to determine their disposition up to customer’s decision. Opinions and interpretations expressed herein are outside the scope of
TÜRKAK accreditation. Tests marked ¤ in this test report are not included in the TÜRKAK accreditation schedule for this laboratory.